Cub Cadet 6284

This recall involves Cub Cadet model year 2018 Challenger 400 4x4 utility vehicles with model number 37BV3BHK010. The yellow utility vehicles have four-wheel drive with side-by-side seating for two people. "Challenger 400" and "4x4" is printed on both sides of the utility vehicle's bed. "Cub Cadet" is printed on both sides of the front fender. The recalled vehicles were manufactured between May 2018 and August 2018. The model number and manufacture date in MM/YYYY format can be found on a label located on the seat frame under driver's seat.

This recall involves Cub Cadet model year 2018 RZT SX EFI residential zero turn riding mowers. The yellow, four-wheel mower with steering wheel control is sold with a 42, 46 or 50-inch cutting deck. "Cub Cadet" is printed on the front and sides of the mower, and on the seat's backrest. "RZT SX" is printed below the seat. Models included in the recall are 17AWCBYS010, 17AWCBYZ010, 17RWCBYN010, 17RWCBYN210, 17RWCBYS010 and 17RWCBYZ010 and were manufactured between December 2017 and June 2018. The model number and manufacture date in MM/YYYY format can be found on a label located under the seat frame.

This recall involves Cub Cadet model year 2018 Challenger 400 4x4 utility vehicles with model number 37BV3BHK010. The yellow utility vehicles have four-wheel drive with side-by-side seating for two people. "Challenger 400" and "4x4" is printed on both sides of the utility vehicle's bed. "Cub Cadet" is printed on both sides of the front fender. The recalled vehicles were manufactured between May 2018 and August 2018. The model number and manufacture date in MM/YYYY format can be found on a label located on the seat frame under driver's seat.

This recall involves Cub Cadet model year 2018 RZT SX EFI residential zero turn riding mowers. The yellow, four-wheel mower with steering wheel control is sold with a 42, 46 or 50-inch cutting deck. "Cub Cadet" is printed on the front and sides of the mower, and on the seat's backrest. "RZT SX" is printed below the seat. Models included in the recall are 17AWCBYS010, 17AWCBYZ010, 17RWCBYN010, 17RWCBYN210, 17RWCBYS010 and 17RWCBYZ010 and were manufactured between December 2017 and June 2018. The model number and manufacture date in MM/YYYY format can be found on a label located under the seat frame.

This recall involves four-wheel drive Cub Cadet 2016 Challenger utility vehicles. Model numbers included in the recall are: CX500 (37AW7CKD010, 37AW7CKD710, 37AW7CLD010, 37AW7CLD710, 37AW7CMD710, 37AW7CND710); CX700 (37AX7CKD010, 37AX7CKD710, 37AX7CLD010, 37AX7CLD710, 37AX7CMD710, 37AX7CND710); and CX750 Crew (37AY8CKD710, 37AY8CLD710, 37AY8CMD710, 37AY8CND710). The utility vehicles were sold in yellow, red, blue and camouflage. The recalled vehicles were manufactured between March 2016 through November 2016. A label located under the driver's seat lists the model number and the month and year of manufacture.

When PTO is engaged for blades and lowered to begin cutting grass, engine bogs down and eventually stalls. Operates normally under normal conditions without PTO load.

User reports developing a heavy leak on the front left wheel after heavy use over the past year. The leak is likely related to axle seals or bearings at the front wheel hub.

Engine surges with throttle fluctuating up and down during idle and running. Issue does not occur under load (e.g., when PTO is engaged). User has replaced oil, oil filter, air filter, fuel filter, fuel pump, spark plugs, and carburetor without resolution.

PTO clutch intermittently disengages and stops cutting despite pulleys and deck belt still spinning. Issue occurs intermittently during mowing operation. Temporary workaround is manually disengaging and re-engaging PTO, which restores cutting for short duration before issue recurs.

After running for approximately 10 minutes, the ammeter drops to the middle position. When PTO is turned off and back on, it sometimes fails to engage and requires throttle adjustment to function properly.