John Deere 2320

Japanese manufacturer safety recall affecting the lighting. Declared production window: 2021–2022.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

Japanese manufacturer safety recall affecting the electronic control. Declared production window: 2020–2024.

I own a 2320 swather with a 135 twin draper platform. I am having trouble with the variable speed pump pulleys/sheaves. I am looking to replace/repair these pulleys and John Deere has discontinued the pulleys part numbers (AE32321 and E53990). Without these, I may as well as junk the header. Apparently they also do not list an upgrade pump, pulley system. This is unacceptable. There are many of t

Hi all, Recently serviced my JD 2320 and now the FEL and 3pt hitch won't lift to full capacity... Guessing maybe there is air trapped in the system. It's supposed to bleed out automatically but it doesn't seem to be getting any better... looking for some advice.

Hello, I have a JD 2320 and I have a few questions as I am new with tractors and I bought it used with 430 hours year 2012. The first thing I have done is grease all the zerks including the u joints of the transmission shaft (I removed the deck for this). Is it normal that there is a whining noise when I go fwd or backwards? I have moved some mulch last week and today the noise is more. Also, is it normal that then pedals to go fwd or backwards get aruffer if the tractor is pushing or pulling something heavy? Finally, I have checked the clear window that is the level of the hydraulic fluid and it is full and not 3/4 (when the machine is cold). I have read this should not be so I will need to drain it? Thanks for your help.

Hi all, Recently serviced my JD 2320 and now the FEL and 3pt hitch won't lift to full capacity... all new authentic JD fluids and filters. Current fluid level is good. Guessing maybe there is air trapped in the system. It's supposed to bleed out automatically by cycling through loader functions but it doesn't seem to be getting any better... how long should this take? Any advice appreciated.