John Deere 316

Japanese manufacturer safety recall affecting the lighting. Declared production window: 2021–2022.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

Japanese manufacturer safety recall affecting the electronic control. Declared production window: 2020–2024.

Engine dies when PTO switch is engaged. Deck occasionally kicks on for a second before shutdown. Root cause identified: PTO power cable grounding out on frame due to pinching between fuel line and frame, causing electrical short.

The transaxle hydraulic return line had a crack that was taped over by the previous owner. The crack caused hydraulic fluid leakage, resulting in a thick fluid film buildup on the equipment. The owner had been repeatedly topping off the fluid instead of replacing the damaged line.

Transaxle hydraulic return line developed a crack that was taped over by previous owner. Fluid loss resulted in repeated top-offs with hydraulic fluid rather than line replacement.

Howdy y'all! This is my first "tractor" and I've got a question (or several) about using it to get done what I need. It came with a snow plow on the front, and basic hydraulic controls, but it doesn't seem like I could feasibly spread soil and wood chips without doing damage to the system. I've tried to figure it out on my own, but I don't quite understand the hitch set up I have going on, so I'm not sure if I need an adapter or if I'm just not looking in the right place to attach a grader blade. I've attached some pics of the hitch area. I have tried looking through other posts, so please forgive me if I've missed this info posted elsewhere. Thanks in advance for your kind help!

I think these little F’ers got into some wires. 3 amp fuse blows when I engage PTO and engine cuts out when transmission is engaged. Maybe something with the hydro system?