John Deere 997

Japanese manufacturer safety recall affecting the lighting. Declared production window: 2021–2022.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

Japanese manufacturer safety recall affecting the electronic control. Declared production window: 2020–2024.

After persistent vibrations throughout the tractor since new, the engine froze and would not restart. The tractor exhibited severe vibrations that the dealer could not duplicate. A center blade came loose due to vibration-induced bolt failure.

Tractor exhibited severe vibrations since new, affecting the entire machine. The vibrations were persistent enough to loosen bolts on the center blade, causing it to detach and strike the deck.

I have a friend who is looking to sell a 1997 (approx.) John Deere with 1,069 hours. The serial number is unknown because the tag has fallen off. It has all-wheel steer and a 60-inch deck. The steering cylinder is leaking, the steering wheel has some wobble, and it tends to drift slightly when driving straight. The engine runs very smoothly and starts easily in cold weather. The deck lift, differential, and lights all work properly. What would be a fair price to offer? I was thinking around $3000

I just bought a used walk behind and am not used to the controls. I hit a telephone pole with it and it broke in half. Can it be repaired? I was thinking the shaft can be welded, but I'm not sure how to get the broken piece out of the deck. The yellow picture is the deck and the green is the mower frame. It's a 1997 John Deere 54", 17HP Walk behind. Serial number of mower: gx1330x055341 17 HP COMM Mow Serial number of deck: GX54MCX055051 54 COMM W-B It looks like the shaft is welded to the frame, not sure if they would sell just the shaft. [Diagram:](https://imgur.com/a/RKBAtho) [Pictures](https://imgur.com/a/nQ4AADd)

Does anyone know where I could even find one of these?