Where Is the Valtra PIN Plate?

Last updated May 19, 2026 · 6 min read

Bertram Sargla

Founder, MachinetrailMay 19, 2026

Quick answer

On most modern Valtra tractors, the factory PIN plate is on the right-hand side of the chassis near the cab step, and the same PIN is also stamped into the chassis frame casting nearby. The engine carries its own separate serial. Always cross-check the riveted plate against the engraved frame stamp — a mismatch is the single strongest stolen-equipment signal at the inspection stage.

Check a Valtra PIN now →

Modern (post-2000) Valtra PIN format

Modern Valtra tractors (an AGCO brand) carry a 17-character ISO 3779 PIN on the chassis plate. Valtra assembly is concentrated at Suolahti, Finland (the historic Valmet / Valtra plant) and at Mogi das Cruzes, Brazil for the South American market. The 17-character PIN follows the standard ISO field layout.

Legacy Valtra serial format

Pre-2000 Valtra (and earlier Valmet-branded) tractors carry a shorter Valmet/Valtra-internal serial — typically a 6-to-7-digit sequence printed on the factory data plate. Year requires the published model-year break tables for the specific Valmet or Valtra family.

Where to find the PIN plate on a Valtra

Factory PIN / data plate (the riveted plate). On modern Valtra tractors (A / G / N / T / S / Q series) the factory data plate is on the right-hand side of the chassis near the cab step, or on the right-hand A-pillar inside the cab. It carries the full 17-character PIN plus the Valtra internal serial.
Chassis engraving (the same PIN, stamped). Valtra stamps the chassis serial into the frame casting near the plate, on the right-hand front frame rail on most current-production models.
Engine serial (separate identifier). Valtra tractors run AGCO Power (formerly Sisu Diesel) engines built at Linnavuori, Finland — only a short distance from the Suolahti tractor plant. The engine serial follows the AGCO Power format and is stamped on the engine block.
Operator's manual and dealer service file. The PIN appears on the title page of the manual delivered with the machine and in any authorised Valtra dealer service-history record. If the seller cannot produce the manual or a dealer service record, that is itself a flag worth pricing in.

Model-specific variations

Valtra plate-position conventions vary by model family. The following are the locations to expect on the most common current and recent product lines:

A Series (compact / utility) — plate on the right-hand frame rail near the cab step.
G / N Series mid-range — plate on the right-hand chassis rail under the cab step; secondary CE plate inside the cab.
T Series row-crop — plate on the right-hand main frame between front axle and cab; engraving on the same frame.
S Series large-frame and Q Series — plate on the right-hand chassis rail under the cab step; secondary emissions / homologation plate inside the cab on the A-pillar.
Brazil-built Mogi das Cruzes Valtras (BH, BM lines) — plate location follows the same right-hand frame convention; WMI in the PIN identifies the Mogi das Cruzes plant.

How to verify the PIN is genuine

A correct PIN is one that decodes structurally and appears in three consistent places on the machine. Walk the machine and check, in order:

Plate vs engraving match. The 17-character PIN on the riveted plate must match the engraved chassis stamp character-for-character. Mismatched, partially mismatched, or "the plate fell off" stories are walk-away signals.
Rivet condition. Factory plates have factory rivets — uniform heads, consistent corrosion, no fresh tool marks. Fresh non-original rivets, missing rivets, or screws where there should be rivets are signals.
Paint and surface match. The area immediately around a factory plate should weather and corrode at the same rate as the surrounding metal. Fresh paint, polished metal, or chemical residue around the plate are signals.
Font and spacing. Compare the plate's font, character spacing and plate-edge profile against other Valtra machines of the same era. Counterfeit plates are usually recognisable by font or spacing differences from the factory original.
Engine serial recorded. The engine serial is its own identifier; record it separately and check that it appears in the maintenance history. A new engine is normal on a high-hour machine, but it should be documented.
Cross-check against a registry. Even a perfectly-formed PIN can be stolen. A registry cross-check (Machinetrail covers 14 European registries plus a stolen-equipment dataset in one lookup) is the last line of defence.

What to do after finding the PIN

With the PIN written down (all three places — plate, engraving, engine serial), the pre-purchase value comes from cross-checking that PIN against three failure-mode databases before money changes hands:

Stolen-equipment registries. A stolen Valtra will be reclaimed by police regardless of how clean the paperwork looks. Machinetrail queries 14 European registries plus TER-Europe-style and NER-style stolen-equipment data in a single lookup keyed to the PIN.
Open safety recalls. EU Safety Gate, member-state agencies (Bundesnetzagentur, RDW, Traficom) and OEM recall feeds. Open recalls on hydraulic, brake, or PTO systems are a measurable safety risk and a re-sale-value problem.
Auction comparables and market value. What did similar Valtra machines actually sell for in the last 12 months? Decoded PIN plus model plus year plus hours plus region returns the range of recent sale prices.

Paste the PIN into the Machinetrail homepage lookup for a structural decode plus the cross-checks above.

Run a free Valtra PIN check

Free preview: structure check + recall count + top-5 issues + 2 auction comparables.

Check a Valtra PIN now

Related guides

Frequently asked questions

Where is the PIN plate located on a Valtra tractor?

On modern Valtra tractors (A / G / N / T / S / Q series) the factory data plate is on the right-hand side of the chassis near the cab step, or on the right-hand A-pillar inside the cab. It carries the full 17-character PIN plus the Valtra internal serial. The same PIN is also stamped into the chassis itself: Valtra stamps the chassis serial into the frame casting near the plate, on the right-hand front frame rail on most current-production models. The engine carries a separate serial — Valtra tractors run AGCO Power (formerly Sisu Diesel) engines built at Linnavuori, Finland — only a short distance from the Suolahti tractor plant. The engine serial follows the AGCO Power format and is stamped on the engine block. Always cross-check the plate against the engraving — a mismatch or fresh paint around the rivets is a primary stolen-equipment signal.

What does a modern Valtra PIN look like and how is it structured?

My Valtra serial is shorter than 17 characters. Is it real?

Yes — pre-ISO Valtra equipment uses an OEM-specific serial format that pre-dates the 17-character ISO 3779 standard. Pre-2000 Valtra (and earlier Valmet-branded) tractors carry a shorter Valmet/Valtra-internal serial — typically a 6-to-7-digit sequence printed on the factory data plate. Year requires the published model-year break tables for the specific Valmet or Valtra family. The position-by-position decoding rules that apply to a modern 17-character PIN do not apply to these older serials; year and configuration have to be looked up from the published model-year break tables for the specific family.

What if the Valtra chassis plate and the engraved frame number don't match?

A mismatch between the riveted plate and the chassis engraving is the single strongest stolen-equipment signal at the inspection stage. Common patterns: a freshly painted plate over a different underlying engraving; a plate with non-factory rivet heads; a plate where the font and spacing does not match other Valtra machines of the same era. Walk away from the deal — and report the serial to the relevant national registry (TER-Europe, NER in the US, the Plant And Agricultural National Intelligence Unit in the UK). Do not accept "the original plate fell off and the dealer made a replacement" without paperwork from a recognised Valtra dealer attesting to the replacement.

Is the engine serial on a Valtra the same as the chassis PIN?

No. Valtra tractors run AGCO Power (formerly Sisu Diesel) engines built at Linnavuori, Finland — only a short distance from the Suolahti tractor plant. The engine serial follows the AGCO Power format and is stamped on the engine block. The engine serial identifies the engine alone — on a re-engined machine the engine serial will not match the factory chassis-PIN-implied engine, and that's normal but should appear in the maintenance history. Always record both serials separately when documenting the machine, and never assume that decoding the engine serial returns information about the chassis or vice versa.

What if the Valtra PIN plate has been removed or is illegible?

Try the chassis engraving first — Valtra stamps the chassis serial into the frame casting near the plate, on the right-hand front frame rail on most current-production models. On a legitimate machine the engraving survives even when the plate is gone. If both the plate and the engraving are missing or obscured, that's a strong fraud signal: factory plates do not fall off in normal use, and engravings can only be defeated with deliberate grinding. The next-best identifiers are the engine serial on the engine block and any telematics-system identifiers; combined, those can in some cases be matched back to an original PIN through the OEM dealer network — but the burden of proof shifts onto the seller, not onto you.

Does Valtra have a telematics system that records true hours separately from the dashboard?

Valtra also operates Valtra Connect / AGCO Connect as a factory-fit telematics system that records hours and faults independently of the dashboard hour-meter — ask the seller for a current telematics report and compare it against the recorded service history. Whichever telematics system is present, dashboard hour-meters can be rolled back; telematics-recorded hours are much harder to alter and so are the gold-standard rollback check on any used Valtra.

How do I use the PIN once I've found it?

Once you have the PIN, paste it into the Machinetrail homepage lookup for a structural decode plus theft, recall and auction cross-check. The free preview confirms the PIN is well-formed and surfaces the recall count, top-5 known issues for the model, and two recent auction comparables. The full report adds the complete recall list, full known-issues list with severity ratings, the full auction history for that model and year, a reliability score, full specifications, and a market-value range — all keyed to the PIN-resolved canonical machine.